How Much Does a Concrete Patio Cost in Florida?
Plain, stamped, stained, and overlay pricing by size, region, and finish type.
$6-$10
PLAIN
$8-$12
COLORED
$10-$18
STAMPED
$2-$8
STAINED
$5-$14
OVERLAY
A concrete patio in Florida costs $6 to $18 per square foot depending on the finish, size, and whether you’re pouring new concrete or refinishing an existing slab. A basic 400 sqft patio runs $2,400 to $4,000. A stamped patio with color and pattern runs $4,000 to $7,200. A stained or resurfaced existing patio costs $800 to $3,200.
Those ranges are wide because “concrete patio” covers everything from a plain gray slab to a multi-color stamped surface that replicates natural stone. The finish you choose is the single biggest factor in your final price.
Cost by finish type
Plain concrete
$6-$10/sqft
Standard broom or smooth finish. Clean, functional, durable. No color or pattern. The most affordable option.
400 sqft: $2,400-$4,000
Colored concrete
$8-$12/sqft
Integral color mixed into the concrete. Permanent - never chips or peels. Earth tones, grays, tans, terracotta.
400 sqft: $3,200-$4,800
$10-$18/sqft new
Textured patterns replicating stone, brick, tile. Most dramatic visual impact. Ashlar slate is #1 in Florida.
400 sqft new: $4,000-$7,200
400 sqft overlay: $2,800-$4,800
Stained concrete
$2-$8/sqft existing slab
Permanent color on existing concrete. Acid stain for earth tones, water-based for any color. Most affordable upgrade.
400 sqft existing: $800-$3,200
Concrete overlay
$5-$14/sqft
New surface over existing slab. Can be stamped, textured, or smooth. 40-60% less than full replacement.
400 sqft: $2,000-$5,600
The type of finish drives the price more than any other factor. Here’s what each option costs in Florida.
Plain concrete patio
A standard broom-finish or smooth-finish concrete patio is the most affordable option. The concrete is poured, finished with a broom texture or smooth trowel, and sealed. No color, no pattern, no decorative treatment. It’s clean, functional, and durable – just not visually distinctive.
Cost: $6 to $10 per square foot
400 sqft patio: $2,400 to $4,000
600 sqft patio: $3,600 to $6,000
Best for: budget-focused projects, side yards, utility areas, or patios that will be mostly covered by outdoor furniture and rugs.
Colored concrete patio
Integral color is mixed directly into the wet concrete before pouring, creating a uniform color throughout the slab. Unlike paint or stain, integral color is permanent – it goes all the way through the concrete so it never chips, peels, or wears away at the surface. Available in earth tones, grays, tans, and terracotta shades that complement Florida’s natural landscaping.
Cost: $8 to $12 per square foot
400 sqft patio: $3,200 to $4,800
600 sqft patio: $4,800 to $7,200
Best for: property owners who want more than gray but don’t need texture or pattern. A colored patio with a nice broom finish looks intentional and designed without the cost of stamping.
Stamped concrete patio
Stamped concrete is the most popular decorative patio finish in Florida. Wet concrete is poured, colored with hardener and release agent, then pressed with textured mats that create patterns – ashlar slate, cobblestone, brick, wood plank, flagstone, and more. The result is a three-dimensional surface that replicates the look of natural materials at a fraction of the cost.
Cost: $10 to $18 per square foot (new pour)
Cost: $7 to $12 per square foot (stamped overlay on existing slab)
400 sqft patio (new pour): $4,000 to $7,200
600 sqft patio (new pour): $6,000 to $10,800
Best for: property owners who want the most dramatic visual impact. Stamped patios are the centerpiece of Florida outdoor living spaces – they look like natural stone but cost 50 to 70% less. The ashlar slate pattern in warm earth tones is the most requested decorative concrete installation in the state.
Stained concrete patio
Concrete staining adds color to an existing slab without changing the texture or adding thickness. Acid stain creates unique, translucent earth tones through a chemical reaction with the concrete. Water-based stain provides consistent color in any hue. Both types penetrate the concrete surface permanently – they won’t chip or peel like paint.
Cost: $2 to $8 per square foot (on existing concrete)
Cost: $8 to $16 per square foot (new pour plus stain)
400 sqft existing patio stain: $800 to $3,200
400 sqft new patio with stain: $3,200 to $6,400
Best for: property owners with an existing patio that’s structurally sound but visually boring. Staining is the most affordable way to transform a plain gray slab into something that looks intentional. Also great for adding color accents to stamped or textured patios.
Concrete overlay patio
A concrete overlay is a thin layer of polymer-modified cement applied over an existing slab to create a new surface. Overlays can be stamped, textured, colored, or left smooth. They bond to the existing concrete and add 1/8 to 3/4 inch of new material without significantly raising the surface height.
Cost: $5 to $14 per square foot
400 sqft patio overlay: $2,000 to $5,600
600 sqft patio overlay: $3,000 to $8,400
Best for: existing patios with surface damage, discoloration, or outdated finishes. Overlays are 40 to 60% cheaper than tearing out the old patio and pouring new. If your concrete is structurally sound but cosmetically damaged, an overlay saves thousands compared to full replacement.
Not sure which concrete type or thickness your patio needs? See our poured concrete guide with free calculator.
Cost by patio size
Most contractors have a minimum project charge of $1,500-$3,000 regardless of size.
Larger patios cost more total but less per square foot due to economies of scale. Here are typical Florida patio sizes and what they cost.
Small patio (200 sqft): $1,200 to $3,600
Ideal for a bistro table and two chairs. Common in townhomes and smaller backyards.
Medium patio (400 sqft): $2,400 to $7,200
Fits a dining table, seating area, and grill space. The most common residential patio size in Florida.
Large patio (600 sqft): $3,600 to $10,800
Full outdoor living room with dining, lounging, and cooking zones. Common in newer Florida homes with emphasis on outdoor living.
Extended patio (800-1,200 sqft): $4,800 to $21,600
Resort-style outdoor living with pool integration, outdoor kitchen, fire pit area, and multiple seating zones. High-end residential and custom homes.
Most contractors have a minimum project charge of $1,500 to $3,000 regardless of size. A 100 sqft patio costs more per square foot than a 600 sqft patio because the setup, mobilization, and cleanup costs are similar regardless of size.
Regional pricing across Florida
Patio pricing varies by region based on labor costs, competition, and cost of living.
Southeast Florida (Broward, Palm Beach, Miami-Dade): $8 to $18/sqft. Highest pricing in the state. Higher labor costs and cost of living drive premiums. Luxury market demands higher-end finishes.
Southwest Florida (Lee, Collier, Sarasota): $7 to $16/sqft. Second highest market. Strong demand from retirement and vacation home market drives steady pricing.
Tampa Bay (Hillsborough, Pinellas, Pasco, Hernando, Manatee): $6 to $14/sqft. Competitive market with many contractors. Good balance of quality and pricing. Most options available.
Central Florida (Orange, Seminole, Osceola, Lake): $6 to $13/sqft. Growing market with new construction driving demand. Competitive pricing among established and newer contractors.
Northeast Florida and Panhandle (Duval, Escambia, Bay): $6 to $12/sqft. Lower labor costs. Fewer decorative specialists means less competition but also fewer options for high-end work.
Florida Heartland (Sumter, Marion, Highlands): $5 to $10/sqft. Lowest pricing in the state. Fewer contractors serve these areas which can mean longer scheduling waits.
Existing patio cracking? See whether you need repair, resurfacing, or full replacement in our crack repair guide.
What affects your price
Site preparation
Grading, drainage, demolition of existing patio. Flat clear site is cheapest.
Impact: +$2-$6/sqft
Shape and layout
Curved edges, multiple levels, built-in steps add forming complexity.
Impact: +$2-$5/sqft
Concrete thickness
Standard 4". Hot tubs, outdoor kitchens, or poor soil need 5-6".
Impact: +$1-$3/sqft
Access
If trucks can't reach the pour site, pump trucks or wheelbarrow delivery needed.
Impact: +$500-$1,500 flat
Beyond the finish type and size, several factors move your final price up or down.
Site preparation: if the area needs grading, drainage work, tree root removal, or demolition of an existing patio, add $2 to $6/sqft. A flat, clear site with good drainage is the cheapest starting point.
Concrete thickness: standard residential patios are 4 inches thick. If your patio will support heavy items like a hot tub, outdoor kitchen island, or fire pit – or if the soil conditions require it – 5 to 6 inch thickness adds $1 to $3/sqft.
Shape and layout: square and rectangular patios are the most efficient to form and pour. Curved edges, multiple levels, built-in steps, or integration with existing structures add complexity and cost – typically $2 to $5/sqft in additional forming and finishing work.
Reinforcement: standard welded wire mesh is included in most quotes. Rebar reinforcement for heavy-load areas or unstable soil adds $0.50 to $1.50/sqft.
Sealer: all decorative patios should be sealed after installation. Most contractors include the first sealer application in their quote. If not, sealer adds $1.50 to $3/sqft. Resealing is needed every 2 to 3 years in Florida at $1.50 to $3/sqft.
Access: if concrete trucks can’t reach the pour site directly, pump trucks or wheelbarrow delivery adds $500 to $1,500 to the project cost.
Beyond the finish type and size, several factors move your final price up or down.
Site preparation: if the area needs grading, drainage work, tree root removal, or demolition of an existing patio, add $2 to $6/sqft. A flat, clear site with good drainage is the cheapest starting point.
Concrete thickness: standard residential patios are 4 inches thick. If your patio will support heavy items like a hot tub, outdoor kitchen island, or fire pit – or if the soil conditions require it – 5 to 6 inch thickness adds $1 to $3/sqft.
Shape and layout: square and rectangular patios are the most efficient to form and pour. Curved edges, multiple levels, built-in steps, or integration with existing structures add complexity and cost – typically $2 to $5/sqft in additional forming and finishing work.
Reinforcement: standard welded wire mesh is included in most quotes. Rebar reinforcement for heavy-load areas or unstable soil adds $0.50 to $1.50/sqft.
Sealer: all decorative patios should be sealed after installation. Most contractors include the first sealer application in their quote. If not, sealer adds $1.50 to $3/sqft. Resealing is needed every 2 to 3 years in Florida at $1.50 to $3/sqft.
Access: if concrete trucks can’t reach the pour site directly, pump trucks or wheelbarrow delivery adds $500 to $1,500 to the project cost.
Concrete patio vs other materials
How does concrete compare to other patio materials in Florida?
Concrete (plain): $6-$10/sqft installed. 25-50 year lifespan. Low maintenance – seal every 3-5 years. Handles FL heat and rain well.
Concrete (stamped): $10-$18/sqft installed. 25-50 year lifespan. Reseal every 2-3 years. Looks like stone at 50-70% less cost.
Pavers: $12-$25/sqft installed. 25-50 year lifespan. Individual pavers can shift, settle, and grow weeds between joints. Higher installation cost but individual units are replaceable.
Natural stone: $20-$50+/sqft installed. 50+ year lifespan. Premium look and feel. Highest cost option. Requires sealing and joint maintenance.
Wood deck: $15-$35/sqft installed. 10-20 year lifespan in FL. Susceptible to rot, termites, and moisture damage. Requires annual power washing and staining.
Composite deck: $25-$50/sqft installed. 25+ year lifespan. No rot or termites. Gets extremely hot in Florida sun – too hot for bare feet in summer months.
Concrete is the best value for Florida patios when you factor in initial cost, lifespan, and maintenance. A stamped concrete patio at $10 to $18/sqft looks like natural stone at $20 to $50/sqft and outlasts a wood deck by 20+ years.
How to get the best price on your patio
Get 3 quotes minimum. Pricing varies significantly between contractors even in the same county. Three quotes give you a realistic range and help identify outliers.
Time it right. Late fall and winter (November through February) is the slow season for Florida concrete contractors. You’ll find better availability and sometimes 10 to 15% lower pricing. Avoid scheduling during the peak of summer rainy season (June through September) when afternoon thunderstorms delay pours and extend timelines.
Bundle projects. If you need a patio and a driveway, or a patio and pool deck work, getting quotes for both together typically saves 10 to 20% versus separate projects. The contractor’s mobilization and setup costs are spread across more square footage.
Consider your slab first. If you have an existing patio, get it evaluated before assuming you need a full tear-out and repour. Staining ($2-$8/sqft) or an overlay ($5-$14/sqft) on a sound existing slab saves 40 to 60% compared to full replacement.
Ask about the sealer. Make sure your quote includes the first sealer application. If it doesn’t, you’ll need to budget an additional $1.50 to $3/sqft within 30 days of installation.
Find a patio contractor in your county
Browse by county. Contact them directly. No shared leads.
Browse contractors by county
Also read
How Much Does Stamped Concrete Cost in Florida? - detailed stamped pricing
Stamped Concrete Patio Ideas and Designs - patterns, colors, layouts
Stamped Concrete vs Pavers in Florida - full comparison
How Much Does Stained Concrete Cost? - staining pricing
Types of Decorative Concrete for Florida - all options compared
How to Choose a Contractor - hiring guide
When to Reseal Decorative Concrete - maintenance schedule